Видео

Hi, very nice plane! How much weight did you added in front with dle 55?

Horizon Hobby may have not wanted to be responsible for returns of customers and coped out. What other reason would they discontinue all the good planes we were used to? They have gotten rid of most all the good planes. If you order a plane make sure you want it because I tried canceling planes on two occasions and was refused even when it was only hr after ordering them . You may be able to return them with a RA # but return shipping is on you.

Great flying Ethan...smooth! Great model!

Can I get one in red color? All I see is the blue

Since I live in mountains 🏔 of northern California this could be one of my airplanes, last year I upgraded my transmitter collection to a Spektrum NX-10 SE just for a plane like this. 😊

Keep the balsa planes flying and coming!🫡

Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/search?q=Ov-10+Bronco+20cc&prefn1=completionLevel&prefv1=Almost+Ready-To-Fly&srule=best-matches&sz=24 for more information on the OV-10 Bronco 20cc ARF. The Hangar 9 OV-10 Bronco 30cc took the market by storm as our largest giant-scale warbird to date. However, the 108-inch wingspan made storing and transporting difficult for many pilots. The OV-10 Bronco 20cc is a scaled-down version with an 84-inch wingspan that still offers a giant-scale experience but in a more practical size for everyday flying. The three-piece wing makes it possible to remove just the outer panels to transport the center section, including the fuselage, booms, and stabilizer, with the landing gear extended or retracted. Additionally, you can remove a few more screws to transport and store each section separately. The smaller size also makes it compatible with more affordable and popular 20cc engines and 6S electric power systems. Like the larger model, this version also features lightweight but strong and long-lasting built-up wood construction. The factory-applied UltraCote film covering and matching painted parts replicate the finish found on the OV-10 aircraft flown by CAL FIRE. The included decals allow you to personalize your model by applying your chosen nose, N-number, and city name. Various details, including a pitot tube, antennas, cockpit details, a pilot figure, and more, add to the scale finish. Plus, the included electric retractable landing gear set with shock-absorbing and trailing-link struts enhances the scale experience. And it all adds up to deliver a unique and versatile scale model that’s a great choice for more experienced pilots! Follow Hangar 9 on Facebook! facebook.com/Hangar9RC/

Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/product/HAN7035.html for more information on the Pawnee Brave 20cc. The Eagle Squadron RC Flying Field made the Hangar 9 Pawnee Brave 20cc right at home! Watch Horizon Hobby Air Team pilot Ethan Ater flying it around the corn and enjoying its capabilities. The Pawnee Brave 20cc is always an enjoyable evening flyer, especially with the included wing lights! Aircraft Setup: Motor / Prop: Spektrum Avian 5065 450kv [SPMXAM4770] with APC 17x7E propeller [APC17070E] ESC: Avian 100A ESC [SPMXAE1100] Servos: Spektrum A6380 [SPMSA6380] Receiver: Spektrum AR8360T+ [SPM-1033] Follow Hangar 9 on Facebook! facebook.com/Hangar9RC/

Do you think I could use the hitec dm654w servos?

Ethan, beautiful airplane and expertly flown, the little DLE 55 flies the plane well, of course the twin 60 would be impressive. 😊

Thank you! Very good advice and understanding of the equipment, plus above all just be diligent and check, check, check. These planes can be very dangerous but if stay on top of the whole situation, you can save not only the plane but possibly someone's life. Thanks again...

What's the size and weight of the included wheels?

hi.what prop is on?

Basically? You have this much $ money. Time. flying field. Trailer. Radio. Your concern is NOT how to set up an airplane! Click for more." Is nonsense.

Nice flying Ethan! I love that new scheme. Bigger flies better and boy does this one show that!

Awesome plane......👌

Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/product/HAN5260B.html for more information on the CubCrafters XCub 60cc. Welcome to the final build video of the Hangar 9 CubCrafters XCub 60cc build, part of the Hangar 9 Back to Balsa Series! This video wraps up the build of the XCub 60cc by showing how to install the receiver and the wiring of all the electronics to the receiver to make a clean look. Once the wiring is neat and fastened, the radio panel cover is reinstalled to the fuselage. The front windshield supports are installed along with the windshield, side windows, and canopy panel window. The flap linkage covers and light covers are also installed. The build is then wrapped up by attaching the antenna to the top of the fuselage. Thank you for watching the build videos! Check out the CubCrafters XCub 60cc in action here! - ruclips.net/video/NWE5fTwdN3I/видео.html Watch the rest of the Hangar 9 CubCrafters XCub 60cc build videos here! - ruclips.net/p/PLUfse7Ks5AZiX6KAoGCayDQvm6HSlzVC0 Follow Hangar 9 on Facebook! facebook.com/Hangar9RC/

Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/product/HAN5260B.html for more information on the CubCrafters XCub 60cc. Welcome to the fifth build video of the Hangar 9 CubCrafters XCub 60cc build, part of the Hangar 9 Back to Balsa Series! This video is going to start off with the installation of the engine to the motor mount. The fuel tank is installed to its appropriate location behind the motor mount during this process, and the entire motor mount assembly is installed to the firewall on the XCub 60cc. The proper steps in the cowling installation are also covered in this video. Lastly, the spinner and propeller are installed on the engine. *Note that if you are using a DLE 55RA like in the video, you will need to supply around 20-23mm standoffs and extra bolts in order to achieve proper length of 190.5mm between the drive washer and motor mount. Watch the rest of the Hangar 9 CubCrafters XCub 60cc build videos here! - ruclips.net/p/PLUfse7Ks5AZiX6KAoGCayDQvm6HSlzVC0 Follow Hangar 9 on Facebook! facebook.com/Hangar9RC/

Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/product/HAN5260B.html for more information on the CubCrafters XCub 60cc. Welcome to the fourth build video of the Hangar 9 CubCrafters XCub 60cc build, part of the Hangar 9 Back to Balsa Series! This video covers the installation of the horizontal and vertical stabilizer to the tail section of the fuselage. The proper hinging technique for the elevator and rudder is shown as it is very important to not get glue in the pivot point of the hinges and requires careful attention. There is also a tip shown in the video that makes the tail light wire routing through the rudder much easier! The elevator and rudder servos are also installed and hooked up to their respective control surfaces through the control rods and pull-pull cables. The tail wheel assembly and installation are also covered in this video along with the tail bracing. Watch the rest of the Hangar 9 CubCrafters XCub 60cc build videos here! - ruclips.net/p/PLUfse7Ks5AZiX6KAoGCayDQvm6HSlzVC0 Follow Hangar 9 on Facebook! facebook.com/Hangar9RC/

Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/product/HAN5260B.html for more information on the CubCrafters XCub 60cc. Welcome to the third build video of the Hangar 9 CubCrafters XCub 60cc build, part of the Hangar 9 Back to Balsa Series! This video covers the main wing assembly on the XCub 60cc. The ailerons and flaps come pre-hinged which saves plenty of time! As for the rest of the wing assembly, you will see the proper way to install the aileron and flap servos along with how to hook them up to their respective control surface with the control linkage rods. The wing lights are also attached and wired through each wing during this assembly. You will also see how to assemble and attach the main wing struts to the wing as well as how to install the wings to the fuselage. Watch the rest of the Hangar 9 CubCrafters XCub 60cc build videos here! - ruclips.net/p/PLUfse7Ks5AZiX6KAoGCayDQvm6HSlzVC0 Follow Hangar 9 on Facebook! facebook.com/Hangar9RC/

Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/product/HAN5260B.html for more information on the CubCrafters XCub 60cc. Welcome to the second build video in the Hangar 9 CubCrafters XCub 60cc build, part of the Hangar 9 Back to Balsa Series! This video covers the assembly and installation of the main landing gear to the fuselage. The new Hangar 9 XCub 60cc scheme comes with the scale upgrade landing gear in the ARF kit! This allows for a much more realistic appearance both on the ground and in the air. Watch the rest of the Hangar 9 CubCrafters XCub 60cc build videos here! - ruclips.net/p/PLUfse7Ks5AZiX6KAoGCayDQvm6HSlzVC0 Follow Hangar 9 on Facebook! facebook.com/Hangar9RC/

Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/product/HAN5260B.html for more information on the CubCrafters XCub 60cc. Welcome to the first build video in the Hangar 9 CubCrafters XCub 60cc build, part of the Hangar 9 Back to Balsa Series! This video gives an overview of the electronics, engine, and propeller that will be used in this XCub 60cc for the build. You will also see how to prep the covering on your XCub 60cc for the build. during shipping, the XCub's UltraCote covering is often exposed to many changes in temperature, humidity, and pressure which may result in wrinkles. It is a good practice to go over all of the covering with a heat gun or iron to shrink it and get rid of the wrinkles. This ultimately eliminates the risk of potentially loose covering tearing off in flight. Lastly, you will see a good technique in how to install the control arms into the control surfaces. Aircraft Setup: Engine - DLE 55RA Propeller - Falcon 23x8 Carbon Gas Servos - Spektrum A6320 for surfaces and Spektrum A6330 for throttle Receiver - Spektrum AR20400T with two 7.4V 4000mAh 2S 15C Smart LiPo Receiver Batteries Kill Switch - Tech Aero IBEC HV Fuel Tank - AJ Aircraft 24 oz. (4) Spektrum 24-inch Servo Extension [SPMA3005] (2) 12-inch EC3 Battery Extension [SPMEXEC312] (1) Dubro Super Strength Long Servo Arm: 23T [DUB671] (2) Aluminum Servo Arm - [HAN9151] Watch the rest of the Hangar 9 CubCrafters XCub 60cc build videos here! - ruclips.net/p/PLUfse7Ks5AZiX6KAoGCayDQvm6HSlzVC0 Follow Hangar 9 on Facebook! facebook.com/Hangar9RC/

Balsa flies better, it's about time balsa is back that's all I fly! Can't stand foam, too expensive for a beer cooler.

We need another 1/4 scale super scale J-3.

"Back to Balsa" is what we all want to hear, and have been waiting on!!! Balsa .40/.60 scale birds is what we want and need. This hobby needs balsa again. Not just an occasional 40 size sport plane either. Scale Birds!!!

I was hoping to hear the airplane, not music through the entire video.

Nice plane, surprisingly aerobatic. Good flying demo too

Woop Woop!!!

Nice work Ethan! Love the new scheme ;)

Wow that's an amazing plane it just floats through the air I love it 💯🤘

Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/product/HAN5260B.html for more information on the CubCrafters XCub 60cc. The popular Hangar 9 CubCrafters XCub 60cc gets a fresh new look with the blue scheme and included upgrade scale landing gear! Join Horizon Hobby Air Team Pilot Ethan Ater as he takes the XCub 60cc for a flight on a nice sunny day. The new scheme stands out incredibly both on the ground and in the air, and is sure to gain some attention at the field! The Hangar 9® XCub 60cc ARF is an officially licensed replica of the CubCrafters marvel. Working closely with the company, factory drawings of the full-scale aircraft were used to design the model. And, like the full-scale original, our giant-scale XCub model was developed by scrutinizing every element of the platform to make the tried-and-true design better at meeting the needs of the modeler. The result is a best-of-the-best contender for the RC pilot seeking a giant-scale airplane that can do it all. And even though it’s large in size, modern conveniences and performance factors make it easy to complete, easy to handle and easy to fly with rock-solid control. Laser-cut wood construction results in a rugged airframe designed to make onlookers second guess it from the real thing. Genuine UltraCote® covering provides an exterior finish that replicates the CubCrafters original in its debut trim scheme and colors. Its outline is authentic with scale and other details that are practical and realistic, including sprung gear with aluminum wheels and tundra tires, a rugged tail wheel assembly, airfoil-shaped wing struts and operational LED lighting just to name a few. Stay tuned for the upcoming build videos that are part of the Back to Balsa Series! Aircraft Setup: Engine - DLE 55RA Propeller - Falcon 23x8 Carbon Gas Servos - Spektrum A6320 Receiver - Spektrum AR20400T with two 7.4V 4000mAh 2S 15C Smart LiPo Receiver Batteries Kill Switch - Tech Aero IBEC HV Fuel Tank - AJ Aircraft 24 oz. Follow Hangar 9 on Facebook! facebook.com/Hangar9RC/

My 1st jet is a Rauch Airliner MD11 😅😂

The guy in the blue jacket explains in a very clear & concise way. Thanks.

Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/product/HAN2890.html for more information on the Fokker D.VII 30-60cc 87" ARF. Visit ScaleRCEngines.com for these upgraded accessories to the Fokker D.VII and more! Engine: scalercengines.com/products/fokker-d-vii-upgraded-direct-fit-dummy-radial-engine Machine Gun Set: scalercengines.com/products/fokker-d-vii-hanger-9-upgraded-direct-fit-machine-gun-set-87 Cockpit: scalercengines.com/products/fokker-d-vii-d7-upgraded-direct-fit-cockpit-kit-87 Join Sean from Scale RC Engines as he goes over the upgraded accessories that are available for the Hangar 9 Fokker D.VII 30-60cc 87" ARF RC airplane! The upgraded engine, cockpit, and machine guns give the D.VII an world-class scale appearance both on the ground and in the air. Follow Hangar 9 on Facebook! facebook.com/Hangar9RC/

Where did you end up with the CG position ?

I like this scheme. I like it a lot.

Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/search?q=Aermacchi%20MB-339%2060-86N%20Scale%20Military%20Turbine%20Jet%20&fbclid=IwZXh0bgNhZW0CMTAAAR2rx5wUNmUvp6_nNtNK6ZSWjgRmIEopc2Kyu-m7NXwmk_tvoVGldor6n_c_aem_AWzeOB0btgAvyVIHGagq30uYbBVEx7PYWKui2Npw5G8E2W1jMdUlMFCg0fzh-Qsz-qkM7c6jNphW369yPtCQXY_v for more information on the Aermacchi MB-339 Scale Military Turbine Jet. The first-ever Hangar 9 turbine jet is a perfect way for experienced pilots to move into turbine-powered models. It’s also ideal for seasoned jet pilots looking for great value in a well-behaved platform with excellent performance and handling. This version features a scale military trim scheme that includes a variety of details. Developed in the 1970s, the Aermacchi MB-339 is an advanced military trainer and light attack aircraft. Produced by Alenia Aermacchi SpA of Varese, Italy, it has been widely exported and is in service with the air forces of Argentina, Dubai, Italy, Malaysia, New Zealand, and many more. It saw action between Eritrea and Ethiopia in the late 1990s and during the Falklands War in the early 80s. This version is finished with a scale military trim scheme featuring printed covering that includes panel lines, rivets, weathering, and other scale details. Follow Hangar 9 on Facebook! facebook.com/Hangar9RC/

All good stuff and advice...; Except for me the MB 339 ain't that small! I tried the 80N engines and IMHO this airplane needs a 100N. That is the sweet spot for me as it's enough thrust to get out of bad situations if need be. I agree this airplane is not for high speed and so that given I still would say 70-80N engines will be a bit underpowered. 100 the MAX! If one happens to have a Jetcat P130 RX laying around (like I have) Then YES it will fit in the MB 339, but throttle management will be very important... Basically nothing above 1/4 throttle... LOL 😂

Everything Ali talks about in this flight is GREAT advice for a new jet pilot.

🙏 "promosm"

Nice. What prop size are u using with this setup?

Great Job on keeping the Hanger 9 Series alive and the quality up!

Great video, lots of great advice. Thanks for taking the time to make this video 😀

Using a gyro in a fixed wing? Or in a car? I must be much older than I feel. How loud are tnese tiny jets?

Are the new ones blue? Are they only blue now?

Great job Steve and Ali!!! Lots of good information for the beginner turbine guy!

All great advice!

41:44 need to do that with ANY model plane.! during a maiden, etc., a pilot NEEDS to Observe how well/poorly the model glides.

11:25 in general, cg goes at THIRTY PERCENT of chord or mac.!!! in the case of a model that has a swept wing, the mac-location is projected to the root chords, for convenience. d

I'll have a jet soon. Friends have been wanting me to buy their old used stuff for a good price but building/assembling really teaches you the systems. The MB-339 will be my first and this video is a great help. Thanks y'all!